Naslov (eng)

An approach to design of digital sliding mode control for DC-DC converters

Autor

Almawlawe, Muhanad Dheyaa Hashim 1962-

Doprinosi

Mitić, Darko
Antić, Dragan 1963-
Nikolić, Vlastimir
Milojković, Marko 1980-
NIkolić, Saša S. 1982-

Opis (eng)

The primary goal of research in this Ph.D. dissertation is to investigate the possibilities of application of modern control methods in controlling the output voltage of the DC-DC converters (buck, boost) in order to ensure the system robustness to the input voltage and load variations. This dissertation deals with the analysis and application of sliding mode control algorithms in the synthesis of these converters in order to improve the properties of existing converters and to modify them, as well as to adjust and tune the digital sliding mode controls based on the input-output plant model to be applicable in these converters. The design procedure is based on the converter models given in the form of discrete transfer functions. The proposed control for converters is a combination of the digital sliding mode control and (generalized) minimum variance control techniques. The problem caused by an unstable zero of the boost converter, which prevents the direct control of the output voltage of this converter, has been overcome by introducing the generalized minimum variance control. Also, only the output voltage of converter must be measured for the realization of the proposed control, so there is no need for an additional current sensor. This dissertation includes the modification of the developed algorithms with the aim of applying them to low-cost, standard 8- bit microcontrollers. Finally, the efficiency of the proposed solutions is verified by digital simulation and a series of experiments on the laboratory developed prototypes of both converters, as well as by their comparative analysis. The satisfactory experimental results are obtained regarding the typical characteristics of the converters.

Opis (eng)

Bibliografija: listovi 89-101 Datum odbrane: 11.04.2018. Automatics

Jezik

engleski

Datum

2017

Licenca

Ovo delo je licencirano pod uslovima licence
Creative Commons CC BY 2.0 AT - Creative Commons Autorstvo 2.0 Austria License.

http://creativecommons.org/licenses/by/2.0/at/legalcode